Another finished project! We love how this custom flared staircase turned out! This stairway features both painted and stained stair parts. It also has a custom bowed double end starter step that adds to the charm of this gorgeous staircase. Interested in a similar style staircase for your home? The following parts were used to create this beautiful staircase:
Shop Stair Parts Products for this Custom Flared Staircase Project:
Bowed Double End Starter Step 8215
The rounded sides of the top tread of a bowed double end starter step are 14″ wide. The center area of the tread, known as the throat, is 12-1/2″ in the middle (widest part of the bow) The rounded sides adds an additional 11-1/2″ in length to the overall length selected. Example: A 48″ bowed double starter step has an overall end to end length of 71″ (48″ plus 11-1/2″ plus 11-1/2″) All bo…
Our fine hardwood balusters can be customized in terms of height, width, and spacing between details. We specialize in historical reproduction turnings for staircases. All wood baluster profiles can be made in a large version. 2 1/4″ width is the most common upgrade, but we are capable of producing turned wood balusters and newel posts up to 5 1/2″ wide. All wood balusters and wood newel posts are available with the bottom square base block turned round.
All our wood balusters are proudly made in the USA.
Bending Wood Handrail 7600
7600B Bending Hardwood Handrail is 2-5/8 inch wide X 2-1/4 inch high and is bendable to a maximum of a 4 foot radius. The matching straight profile is wood handrail 7600. This contemporary mushroom shaped stair railing style is a popular choice for iron and glass stair systems that require a r…
Wood Stair Treads
Wood stair treads are offered in a standard 1-1/32″ finished thickness after surfacing and sanding. Extra thick hardwood stair treads for open rise staircases are available in any thickness. The most popular over sized wood tread sizes are 1-3/4″ and 2″ thick. We have produced treads as thick as 4″. Any stair tread thicker than 1-3/4″ will require face glue lamination(s) to meet the desired finished dimension.